FC CONFIGURATOR
Products

MGO Coolers

Home / Coolers / MGO Coolers
Marine Gas Oil Coolers , MGOC series

Except Marine Gas Oil Cooling Units, FARAD has developed a new series of product that can be installed in the fuel oil service system in order to reduce the temperature of the MGO, and therefore, increase viscosity. FARAD MGO coolers is a cost-effective and reliable solution for low-Sulphur emissions. The optimized shell & tube design offers easy maintenance, reliability and trouble free operation.

Capacity

Standard designs are available, starting from 1 m3/h to 14 m3/h of MGO flow and cooling capacity 9kW to 146kW. Larger capacities are available on request.

SEA WATER COOLED STANDARD MODELS

  Model (Sea water cooled) Max. Flow rate [m3/h] Heat duty [kW]*
DN 125 SERIES 125/800S 1 9,1
125/1000S 1,5 13,7
125/1200S 2 18,3
125/1400S 2,5 22,9
DN 150 SERIES 150/800S 2 18,3
150/1000S 3 27,4
150/1200S 4 36,6
150/1400S 5 45,7
150/1600S 6 54,8
150/1800S 7 64
150/2000S 8 73,1
  200/1000S 6,5 59,4
DN 200 SERIES 200/1200S 8 73,1
200/1400S 10 91,4
200/1600S 12 109,7
200/1800S 14 128
200/2000S 16 146,3

*MGO outlet temp.: at 36 ºC. (assuming SW temp. at 32 ºC)

FRESH WATER COOLED STANDARD MODELS

  Model (Fresh water) Flow rate [m3/h] Heat duty [kW]*
DN 125 SERIES 125/800F 1,2 9,9
125/1000F 1,8 14,8
125/1200F 2,6 21,4
125/1400F 3,4 27,9
DN 150 SERIES 150/1000F 3,5 28,7
150/1200F 5 41
150/1400F 6,5 53,3
150/1600F 8 65,6
150/1800F 9 73,8
150/2000F 10 82
200/1200F 8,40 68.9
DN 200 SERIES 200/1400F 11 90,2
200/1600F 13 106,5
200/1800F 15 122,9
200/2000F 17 139,3

*MGO outlet temp.:  at 38 ºC. (assuming FW temp. at 36 ºC)

Materials

Materials are sourced from reputable EU manufacturers and material thickness is higher than that required by the relevant design code

Materials of Sea Water cooled:

Header: Cast Iron

Coating: Elastomeric

Shell: Carbon steel

Tubes: CuNi10Fe1Mn

Tube plates: Naval brass

Materials of Fresh Water cooled:

Header: Cats Iron

Coating: Epoxy

Shell: Carbon steel

Tubes: Cu-DHP

Tube plates: Carbon Steel

Standard design data of MGOC
  • MGO inlet temp: 55 Deg. C.
  • MGO outlet temp.: 36 Deg. C. (assuming SW temp. at 32 Deg. C,)
  • MGO outlet temp.: 39 Deg. C. (assuming FW temp. at 36 Deg. C,)
  • Design Pressure (MGO): 1.0 MPa.
  • Cooling system: S.W. or F.W.
  • Compact solution, trouble free operation with easy maintenance
  • “Tailor-made” solution that suits to vessel’s specifications.
Accessories
  • Temperature gauges and sensors.
  • Air vent and drain valves.
  • Safety relief valve
  • Other accessories available as per customer requirements.
Approvals

FARAD’s MGO Coolers are ABS Type approved product (alternatively approved by LR, BV, DNV-GL etc upon request).

Delivery

2-4 week upon order receipt and drawing approval – confirmation. Some models may be available for immediate delivery (in- stock).

WANT TO LEARN MORE?
PRODUCTS
CONTACT US

Tel: +30 2104227410
Fax: +30 2104227303

info@farad.gr

14 Alon Str., Piraeus
GR18540 Greece

Get in touch
ABOUT FARAD

FARAD SA Heat Exchangers, since 1979, design and manufacture high quality marine and industrial tubular heat exchangers.

Farad SA Heat Exchangers Logo
FC Configurator